Winter Environmental Protection Thick Film Heavy Corrosion Resistance Paint
This paint has large tolerance to basic material surface and can be painted with rust, and painted on wet painted surface this paint's primer and surface paint can combinate, with high solid component, one-time painting dry film can reach 125 μm, it belongs to environmental protective paint, can solidify at low temperature(-10ºC), and have enpgh use period in normal temperature. It has excellent physical mechanical performance and anticorrosive performance. It is applicable to steel structure painting of bridge, ship, oil platform, pipeline and storage tank, and applicable to concrete construction, etc.
It is prepared by modified epoxy resin as basic material new amine compound as curing agent, auxiliary, color filler and solvent, etc. (various colors)
Volume Solids: 70%
Dry Film Thickness:125 microns
Theoretical Coverage:281g/ (calculated by 125μm dry film)
Practical Coverage:Allow appropriate loss
Mix Ratio A:B=100:22(by weight)
Method of Application:
Airless Spray: Recommended-Tip range:0.33-0.41mm;OutTotal fluid pressure:17.6-21.1MPa
Brush or Roller: Recommended,only for small area
Conventional Spray: Adoptable but thin to 5-10%,Tip range:2-2.5mm
Thinner LL2000 Special diluent
Storage Life One year
Drying Time(Substrate Temperature 25ºC)
Touch Dry ≤4h Hard Dry ≤24h Overcoating Interval:Minimum 6h Maximum 7days
Painting number Suggest 2 coats
Storage and Handlina
Storage : Store in cool and dry conditons
Pack Size Component A 18.2 kg, Component B 4 kg
Flash Point 35ºC
Specific Gravity Approx 1.73Kg/L
Specification and Surface Preparation
Iron red and grease dirt on steel surface shall be cleaned before painting, and construct it after removing loose objects and sludge on concrete surface.
can be directly painted on steel or concrete surface, and painted two coats according to operating requirements.
This product can be used in construction and solidification with temperature condition above 10ºC normally. Construction surface temperature and paint temperature shall be above this limit.
This product should be used in painting area by professional operators.When painting, please refer to Product Data Sheet and MSDS.Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint.ln order to avoid danger or accident, minimal safety precautions, as follow, should be done:
The paint contains volatile solvent and is flammable.So must keep away from sparks and open flames.No smoking at application site.Effective precautions(such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc)also should be done so as to avoid producing sparks.Flash point of paint, mentioned above on Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site.ln order to remove any danger of explosion,must keep the ratio of gas to air is less than 10% ,the minimum explosive limit in generaLTherefore,200m³ of ventilation quantity per 1 Kg solvent(according to the solvent)is necessary.
Protect skin and eyes, and avoid touching with paints(Recommend to wear working clothes, gloves eye protection, face masks, barrier creams and so on).If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner.ln case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas,especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions(Refer to the specifications), our company will NOT be responsible for any accident.